Title |
Publisher |
Price |
A model of a Dahlgren 9in gun, used in the ACW in verious roles as ship's armamant, fortification or siege wapon. ... [click here for more] |
Xerbath |
$1.80
|
This set contains a Chebeque of 19th century. This type of ships was used for over a millenium in the mediterranean area, but can play its rolle as well in oversea campains or in fantasy games.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$20.00
|
In this set you'll get big and small flagstaffs to be uses in CTE or other table-top games
STL-Files for 3D printing,
big flagstaffs and marker flags for the Napoleonic age, (France, Pussia, Austria, Britain)
small flagstaffs and marker flags for numering unites ... [click here for more] |
Xerbath |
$1.99
|
This set contains a French 16lb Gribauval garrison cannon on a garrison carriage
its contents STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and mm (1:64 and 1:72)
dimension 1/72 about 3cm x 7cm, 28mm 3,4cm x 8cm ... [click here for more] |
Xerbath |
$3.99
|
Marker-carriers small, flat (STL-Files for 3D printing) + Microsoft PowerPoint Templates to be used for table-top games as CTE, with 3D STL data for (included) matching washers and PPT-Files to generate your own Unit-reference cards ... [click here for more] |
Xerbath |
$2.99
|
Marker-carriers for whiteboards for 3D printing
& 3D STL data for (included) matching washers
& Microsoft PowerPoint Templates to gererate your own Unit-reference cards
to be used for table-top games as CTE. ... [click here for more] |
Xerbath |
$2.99
|
Marker-carriers small, steep (STL-Files for 3D printing) + Microsoft PowerPoint Templates to be used for table-top games as CTE, with 3D STL data for (included) matching washers and PPT-Files to generate your own Unit-reference cards ... [click here for more] |
Xerbath |
$2.99
|
This set contains a Medieval Gate as an alternative to the Gate of the Basic Set Orc-Fort.
This expansion 4 to extend the scope to medieval fortification, tribal villages, frontier forts and stuff like this.
It consits of STL-Files, made for 3D printing, to use for table-top-gaming scale 1:72, but can easily be scaled to 20mm -28mm. ... [click here for more] |
Xerbath |
$3.99
|
This set contains a Medieval Watchtower to find its place in table-top-games as stand alone object,or part of a medieval fortification, tribal villages, frontier forts and stuff like this.
It consits of STL-Files, made for 3D printing, in 28mm (1:64) and 25mm (1:72) scale. ... [click here for more] |
Xerbath |
$3.99
|
This set contains the Expansion Set 1 matching to the Orc-Fort Basis Set :
It is the 45° edge version A with removable palisades and destroyed planks to allow the fearless enemy the direct attack!
It consits of STL-Files, made for 3D printing,to used at table-top-gaming scale 1:72, but can easily been scaled to 20mm -28mm ... [click here for more] |
Xerbath |
$2.99
|
This set contains the Expansion Set 2 matching to the Orc-Fort Basic Set :
It is the 45° edge version B with removable palisades and destroyed planks to allow the fearless enemy the direct attack!
It consists of STL-Files, made for 3D printing, to be used at table-top-gaming scale 1:72, but can easily be scaled to 20mm -28mm. ... [click here for more] |
Xerbath |
$2.99
|
This set contains the Expansion Set 3 matching to the Orc-Fort Basic Set :
It is the straight wall with removable palisades and destroyed planks to allow the fearless enemy the direct attack!
It consists of STL-Files, made for 3D printing, to used at table-top-gaming scale 1:72, but can easily be scaled to 20mm -28mm. ... [click here for more] |
Xerbath |
$2.99
|
This set contains the Expansion Set 5 matching to the Orc-Fort Basic Set :
You get 3 simple hovels, alike nativ hovels made og branches and covered with clay, to be used inj tabletop games as expansion for the Orc Fort basic set, but also for other tribal villages.
It consists of STL-Files, made for 3D printing, to used at table-top-gaming scale 1:72, but can also been used for 28mm. ... [click here for more] |
Xerbath |
$2.99
|
This set contains the Basic Set to create a fantasy Orc Fort :
Of course you can use the palisade-walls also for medieval fortifications, tribal villages, frontier forts and stuff like this.
An alternative gate is separately available, other modells will come in future.
The set consits of STL-Files, made for 3D printing, to used at table-top-gaming scale 1:72, but can easily been scaled to... [click here for more] |
Xerbath |
$10.00
|
This set contains the basic elements for Siege works,
a sap, a sap head, sap edge, a battery and some accessories
It is kept in a dimension matching for the limited space in table-top games (and the general difficulty to mill trenches in a table) , and can easily extended by adding more 3D-prints or implementing some expansion models.
The set consists of STL-Files, made for 3D printing, to be... [click here for more] |
Xerbath |
$15.00
|
This is the first expansion to the Siege Works Basic Set, an set of parapets angled in 45°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the second expansion to the Siege Works Basic Set, an set of parapets angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the 3rd expansion to the Siege Works Basic Set, a set of saps angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This is the 4th expansion to the Siege Works Basic Set, a parapet angled in 90°
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.50
|
This set contains a hot Dwarfen (or Orcisch) Steam Gun Howitzer, to show all unwelcome guest the big hammer.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$9.99
|
This set contains a sledge for ammunition supply matching to the steam Gun howitzer
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$1.99
|
This set contains a hot Dwarfen (or Orcisch) Steam Gun Howitzer, to show all unwelcome guest the big hammer. In addition with a sledge for ammunition supply
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$10.99
|
Tabletop calipers metrical, in STL-format to measure distances in tabletop-games
The scale is included in different versions:
in 5mm pitch with cm numbering and in 25mm (+~inch) numbering
split for easier printing for smaller 3D-printers and with/-out pads to avoid warping
some gluing needed
... [click here for more] |
Xerbath |
$1.99
|
Tabletop compass (metrical), in STL-format, to measure distances in tabletop-games
in 12,5mm pitch with 25mm (+~inch) numbering
split for easier printing for smaller 3D-printers and with/-out pads to avoid warping
some gluing needed
... [click here for more] |
Xerbath |
$1.99
|
This set contains some accessorie for the Vauban fortress, but can used also for decoration in other
wargaming environments.
Have fun! ... [click here for more] |
Xerbath |
$1.00
|
This set contains a Fortress in Vauban's star shape style,
to play it's role in a Tabletop-game.
It is kept in a dimension matching for the limited space in table-top games, but can easily extended by adding more 3D-prints or implementing some expansion models.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72, ) ... [click here for more] |
Xerbath |
$22.00
|
This set contains a Fortress in Vauban's pentagonal star shape style,
to play it's role in a Tabletop-game.
It is kept in a dimension matching for the limited space in table-top games, but can easily be extended by adding more 3D-prints or implementing some expansion models.
Ther are two types of bastions included, so you can choose matching to your wished size, you can enlarge the fortress... [click here for more] |
Xerbath |
$22.00
|
This set comes with the 28mm and 25mm STL data for a round bastion, matching to the Fortress in Vauban style. You will get data for a bastion smooth and with embrassures for artillery. ... [click here for more] |
Xerbath |
$3.00
|
This expansion set contains three versions of a small courtine matching to the Fortress in Vauban's star shape style. It comes in three versions, one with e negative 90 deg edge, two other wit positive 90 degree edgesl.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$4.00
|
This set contains two courtine-segments with a gate, matching to the Vauban Fortress program with different width.
They can be used to allow tho access to some demi-lunes or tenailles via a wooden bridge, which is also part of this set.
The bridge can be used separately standing on it#s own pillars.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm... [click here for more] |
Xerbath |
$4.90
|
This set contains three types of demilunes, 4 types of tenailles and a stair, to reinforce the Vauban fortress basic set.
It can be used separately as fortification.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$9.90
|
This set contains a small courtine with an artillery embrasure matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
This set contains a small courtine with infantery embrasures matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
This set contains a long courtine with an artillery embrasure matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
This set contains a long courtine with infantry embrasures matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
An add-on for the Vauban fortress basic set, with 5 types of bastions, an adapter matching to the rectangular fortress set, and courtine extensions allowing to increase the width of the parapet walk (you need theCourtine extension set).
With this extension, you'll get a really mighty fortress in every size you want.
Al STL-Files in 25mm and 28mm scale. ... [click here for more] |
Xerbath |
$13.50
|
This set contains a so called "Ravelin" matching to the Fortress in Vauban's star shape style,
Ravelins are used to protect the wall, "Courtines" of a fortress. Of course it can perfectly used as bastion in ACW or other scenarios
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$6.00
|